Mounting Cups and Grommets - DCOE - set of 4
Carburettor set of 4 Grommets and 8 captive washers
The best quality available, and Webcon manufactured to ensure the highest levels of performance in the toughest conditions.
Suitable for Road and race use.
Installation instructions are as follows:
1. Tighten locknuts in order shown below until contact is just made between locknut, captive washer and grommet
2. Tighten locknuts, in order shown, an additional 1.5 turns
3. The "V" in each grommet should now be equal, and the carburettors correctly mounted
These are not to be confused with cheaper, inferior copies that are available.
DCOE flexible mountings
rubber grommet gromett grommett