Webcon are delighted to announce the launch of new 12v replacement electric
fuel pumps for use on carburettor fuel systems.
The fuel pumps will suit customers who traditionally have used the small rectangular type pumps but have found them either too noisy or too unreliable.
WFP502 Electric Fuel Pump runs at 0.17 - 0.31 BAR (2.5-4.5 PSI), flows at 90 to 130 litres per hour and is extremely quiet and reliable in operation. This pump is suitable for all single, twin and triple Weber installations without the need for an additional fuel pressure regulator, and is a "pusher" type pump which is designed to be mounted horizontally near to the base of the fuel tank.
The pump dimensions are:
and the current draw is 5 amps
WFP502 is a fully sealed unit with steel casing and a zinc plated and yellow
passivated finish. It is supplied with attached filter, mounting bracket and
Push-On 8mm O/D fuel pipe unions for both ends.
Inlet and outlets are threaded 1/8 NPT to take the unions.
Hose clips and 2 x 100mm lengths of fuel line are also included.