Heat Shield - Weber DCOE / DCO/SP
Webcon now manufactures a heat shield for use on the Weber DCOE and DCO/SP range of carburettors.
On non-crossflow engines the carburettors are directly above the exhaust manifold. When exhaust heat rises up it can cause fuel handling problems in sidedraft carburettors. The new Webcon Heat Shield helps alleviate these problems by deflecting the heat around the carburettor.
The new Webcon Heat Shield is superbly made in the UK from 1.6mm Stainless Steel.
The part number 9990398700 is stamped with the Webcon logo to easily distinguish it from the thinner, less effective copies on the market.
Heat shields are sold singly so please order one per carburettor
Please note that it may be necessary to trim the heat shield slightly to allow the throttle lever to fully move.
Webcon Mesh Filters to suit 40DCOE and other carburettors fitted with 56mm stacks
Shaft Nut DCOE / DCNF / IDF / IDA / DCO SP 48
DCOE Fuel union gasket outer
DCOE Fuel union gasket inner
Idle Mixture Screw Spring
Screw - Throttle plate / Inspection cover
Top Cover Screw Standard Length DCOE / DCOSP / DGAS / DGMS / DGES