TPS Kit Weber DCO/SP
Suits unified versions of Weber
48 DCO/SP
50 DCO/SP
55 DCO/SP
DCOSP
*PLEASE NOTE - This will only be suitable for a twin carb application and not when used on a single carb by itself.
Now turn your mapped ignition system into 3D with the superb Webcon TPS kit.
Simply bolt the custom designed backet to the Weber DCOE / DCO/SP or Dellorto DHLA carburettor and connect the TPS to your ignition wiring loom.
Further information can be found by downloading the fitting instructions here
Female connector, boot and terminals can be found in Related Products
*The Blue wire is pin 1 (signal)
Red is pin 3 (5v reference)
Black is pin 2 (ground)
If you are using an Alpha Ignition system, there is no more to do. Simply connecting the TPS evokes the 3D map inside the ECU and no further calibration is required.
Further calibration may be required if you are using a non Alpha system.
*Individual kit components can be found here*
