Throttle Return Spring 73mm
Webcon designed and manufactured tension type throttle return spring measuring 73mm in rest position
Specifically manufactured with the tails seperate to the spring body to avoid weak spots associated with 90 degree bends found on many springs, and to ensure easy fitting.
The loop end is fitted to the anchor point and the U bend end is fitted to the throttle lever or moving throttle linkage part.
DCOE Fuel union gasket outer
DCOE Fuel union gasket inner
Emulsion tube holder DCOE and DCO/SP
Idle Jet holder DCOE and DCO/SP
Auxilliary Venturi locking screw DCOE/SP
Ball Threaded with nut and washer 8mm
Cable Ferrule Linkage kits