Webcon are delighted to announce the launch of a new 6v replacement electric
fuel pumps for use on carburettor fuel systems.
WFP509 Electric Fuel Pump runs at (5-8 PSI), flows at 90 to 130 litres per hour and is extremely quiet and reliable in operation. This pump is suitable for all higher pressure carburettor
installations and may require an additional fuel pressure
regulator depending on the exact system pressure required. WFP509 is a "pusher" type pump which is designed to be mounted
horizontally near to the base of the fuel tank.
The pump dimensions are:
and the current draw is 5 amps
WFP509 is a fully sealed unit with steel casing and a zinc plated and yellow
passivated finish. It is supplied with attached filter, mounting bracket and
Push-On 8mm O/D fuel pipe unions for both ends.
Inlet and outlets are threaded 1/8 NPT to take the unions.
Hose clips and 2 x 100mm lengths of fuel line are also included.
Synchrometer for carburettor / throttle body balancing
38/40/42/45 DCOE 2 x Service Kit 200 needle valve